BEAM1224(S) Conventional Single-ended Reflected Type Beam Smoke Detector

Overview

System Sensor Model BEAM1224 is a four-wire conventional reflected beam smoke detector, which is uniquely suited for protecting open areas with high ceilings, where other methods of smoke detection are difficult to install and maintain. It is to be used with UL Listed compatible control panels only. An advantage of this single-ended reflective design is that it is much easier to install than the dual-ended projected beam detectors. Alignment is quickly accomplished via an optical sight and a two-digit signal strength meter incorporated into the product. Another advantage of the BEAM1224 is that it is listed for operation in temperatures ranging from –22°F to 131°F. This means it can be used in open areas to provide early warning in environments where temperature extremes may exceed the capability of other types of smoke detectors. BEAM1224 consists of a transmitter/receiver unit and a reflector. When smoke enters the area between the unit and the reflector, the smoke causes a reduction in the signal. When the smoke level reaches the predetermined threshold, an alarm is activated BEAM1224 has four standard sensitivity selections, along with two Acclimate™ settings (adjustable sensitivity). When one of the two Acclimate settings is selected, the detector will automatically adjust its sensitivity using advanced software algorithms to choose the optimum sensitivity for the specific environment. BEAM1224S is also equipped with an integral sensitivity test feature, which consists of a test filter attached to a servo motor inside the detector optics. When the remote test station RTS451 /RTS151 is used, the motor is activated and moves the filter into the pathway of the light beam, to test the detector’s sensitivity. This integral sensitivity test feature allows the user to quickly and easily meet the S911 3017888 7260-1653:0168 2165 annual maintenance and test requirements of NFPA 72.

• 16- to 328-foot protection range

• Single-ended, reflective design

• User-friendly alignment procedure

• Six user selectable sensitivity levels

• Optional integral NFPA 72 sensitivity test feature

 • Removable plug-in terminal blocks

• Digital display for easy alignment

• Built-in automatic gain control compensates for signal deterioration from dust build-up

 • Remote test station option

• Paintable cover

• Easiest alignment in the industry

• Heater kits for transmitter/receiver and reflector option

Model Description
BEAM1224S 4-wire Conv. Beam Detector with 8' reflector & integral Sensitivity test, requires SMK
BEAM1224 4-wire Conv. Beam Detector with 8' reflector, requires SMK
BEAMMMK Standard Multi Mounting Kit for ceiling or wall mounting of Beam Detector unit
BEAMLRK Long Range Accessory Kit for over 70m range
BEAMSMK Surface Mount Kit ( Back Box ) for Beam Detector, to use with BEAMMMK
RTS151 Remote Test Station for use with BEAM & DUCT Detectors
RTS151KEY Remote Test Station with Key Switch for use with BEAM & DUCT Detectors

Beam1224

null
null